Fiber output, PM options, seed formats
FL-355-Pico355 nm UV fiber laser
355 nmFL-355-Pico is a 355 nm Fiber laser. Used for scientific research, laser processing. Key specifications: output / average power 1~50 mW, pulse energy 10~500 nJ, repetition rate 0.1-20 MHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-355-Pico
22 specification rows
| Output / average power | 1~50 mW |
|---|---|
| Pulse energy | 10~500 nJ |
| Repetition rate | 0.1-20 MHz |
| Pulse width | 100-900 ps |
| Operating mode | Pulsed |
| Power stability (rms, 4 hours, ±3℃) | <5%, <3% |
| Picosecond all fiber pulsed laser at 355nm | Pulse duration (ps)2 / 100-900 |
| M2 | <2 |
| Polarization ratio (dB) | >15 Horizontal (Vertical optional) |
| Warm-up time (minutes) | <15 |
| Delivery fiber length(cm) | 60 |
| Cooled method | Air cooled |
| Operating temperature (℃) | 15-35 |
| Operating voltage (VDC) | 12V/11.5A |
| Expected lifetime (hours) | >10000 |
| Fundamental Frequency | Third harmonic |
| Wavelength (nm) | 355±1 |
| Average power (mW) | 1-50@5MHz |
| Pulse duration (ps) | 100-900 |
| M² | <2 |
| Rep. rate | 100kHz-20MHz |
| Beam height from base plate (mm) | 40 |
Applications
Uses named on this model’s datasheet.
- Scientific research
- Laser processing
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-355-Pico with nearby fiber lasers across the wavelength range.
