Fiber output, PM options, seed formats
FL-1560-SLM1560 nm infrared narrow-linewidth single-frequency fiber laser
1560 nmFL-1560-SLM is a 1560 nm Fiber laser. M²: <1.1. Key specifications: output / average power 1~10 W, spectral linewidth <5 kHz, m² <1.1. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-1560-SLM
24 specification rows
| Output / average power | 1~10 W |
|---|---|
| Spectral linewidth | <5 kHz |
| M² | <1.1 |
| Typical wavelength (nm) | 1540, 1550, 1560 |
| Operating mode | CW |
| Power stability (rms, 4 hours ±3℃) | <2%, <1%, <0.5% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| Temperature turning range (nm) | >0.4 |
| PZT Tuning range (GHz) | >3 |
| PZT Tuning bandwidth (kHz) | >5 |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.3%, <0.1%, (<0.05% optional) |
| Frequency shift (MHz) (over ±2℃and 8 hours) | <±200 |
| Fiber connector | FC/APC, Collimator optional |
| Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Polarization ratio (dB) | >15, after PM fiber |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Operating temperature (℃) | 15-30 |
| Power supply (VAC) | 110/220VAC |
| Expected lifetime (hours) | >10000 |
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-1560-SLM with nearby fiber lasers across the wavelength range.
