Fiber output, PM options, seed formats
FL-1560-SLM is a 1560 nm Fiber laser. M²: <1.1. Key specifications: output / average power 1~10 W, spectral linewidth <5 kHz, m² <1.1. View specifications, datasheet and enquiry options from Precisometer.
Specifications
24 specification rows
| Output / average power | 1~10 W |
|---|---|
| Spectral linewidth | <5 kHz |
| M² | <1.1 |
| Typical wavelength (nm) | 1540, 1550, 1560 |
| Operating mode | CW |
| Power stability (rms, 4 hours ±3℃) | <2%, <1%, <0.5% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| Temperature turning range (nm) | >0.4 |
| PZT Tuning range (GHz) | >3 |
| PZT Tuning bandwidth (kHz) | >5 |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.3%, <0.1%, (<0.05% optional) |
| Frequency shift (MHz) (over ±2℃and 8 hours) | <±200 |
| Fiber connector | FC/APC, Collimator optional |
| Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Polarization ratio (dB) | >15, after PM fiber |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Operating temperature (℃) | 15-30 |
| Power supply (VAC) | 110/220VAC |
| Expected lifetime (hours) | >10000 |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
FL-1560-SLM: 1560 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. The catalogued beam parameter (<1.1) helps predict how the source will focus and propagate through the instrument.
FL-1560-SLM: Laboratory measurement benefits from a stable, focusable source. 1560 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (<1.1) informs waist size and propagation.
System integration
Use these checks to connect FL-1560-SLM to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber connector: FC/APC, Collimator optional. Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
Cooled method: Air cooled or Water cooled · Operating temperature (℃): 15-30. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
M²: <1.1 · Transverse mode: TEM00. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare FL-1560-SLM with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | FL-1560-SLM (current) | MLL-III-1560-SM | TEM-F-1560DFB |
|---|---|---|---|
| Wavelength | 1560 nm | 1560 nm | 1560 nm |
| Optical power / pulse energy | 1~10 W | 1~15 mW | 1~20 mW |
| Operating mode / pulse width | CW | Confirm for this model | Confirm for this model |
| Beam quality | <1.1 | Confirm for this model | Confirm for this model |
Compare the FL-1560-SLM with nearby fiber lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide