Fiber output, PM options, seed formats
FL-1530-SLM1530 nm infrared narrow-linewidth single-frequency fiber laser
1530 nmFL-1530-SLM is a 1530 nm Fiber laser. M²: <1.1. Key specifications: output / average power 1~1000 mW, spectral linewidth <5 kHz, m² <1.1. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-1530-SLM
25 specification rows
| Output / average power | 1~1000 mW |
|---|---|
| Spectral linewidth | <5 kHz |
| M² | <1.1 |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3℃) | <2%, <1%, <0.5% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Frequency shift (MHz) (over ±2℃and 8 hours) | <±200 |
| Fiber connector | FC/APC, Collimator optional |
| Fiber jacket | PVC, Metal optional |
| Polarization ratio (dB) | >15, after PM fiber |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Power supply (VAC) | 110/220VAC |
| Expected lifetime (hours) | >10000 |
| Typical wavelength (nm) | 1530 |
| Current adjustment range | 1-100% |
| Temperature turning range (nm) | >0.4 |
| PZT Tuning range (GHz) | >3 |
| PZT Tuning bandwidth (kHz) | >5 |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.3%, <0.1%, (<0.05% optional) |
| Fiber length(m) | 1 |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Pointing stability (urad) | <5 |
| Operating temperature (℃) | 15-30 |
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-1530-SLM with nearby fiber lasers across the wavelength range.
