Back to Home

Fiber output, PM options, seed formats

FL-1530-SLM1530 nm infrared narrow-linewidth single-frequency fiber laser

1530 nm

The FL-1530-SLM is a 1530 nm continuous-wave fiber laser. A seed laser establishes the optical signal, and a fiber amplifier increases its power while guiding the light in active fiber. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.

Specifications

FL-1530-SLM

25 specification rows

Output / average power1~1000 mW
Spectral linewidth<5 kHz
M²<1.1
Operating modeCW
Power stability (rms, 4 hours, ±3℃)<2%, <1%, <0.5%
Transverse modeTEM00
Longitudinal modeSLM
Frequency shift (MHz) (over ±2℃and 8 hours)<±200
Fiber connectorFC/APC, Collimator optional
Fiber jacketPVC, Metal optional
Polarization ratio (dB)>15, after PM fiber
Warm-up time (minutes)<30
Cooled methodAir cooled or Water cooled
Power supply (VAC)110/220VAC
Expected lifetime (hours)>10000
Typical wavelength (nm)1530
Current adjustment range1-100%
Temperature turning range (nm)>0.4
PZT Tuning range (GHz)>3
PZT Tuning bandwidth (kHz)>5
Relative intensity noise (rms, 10Hz-3MHz)<0.3%, <0.1%, (<0.05% optional)
Fiber length(m)1
Beam diameter (mm)4±1 (Collimator output)
Pointing stability (urad)<5
Operating temperature (℃)15-30

What do you need?

Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare FL-1530-SLM with the closest available models in the Fiber Lasers family.

Selection parameterFL-1530-SLM (current)MDL-III-1530-SMMDL-III-1530DFB-SM
Wavelength1530 nm1530 nm1530 nm
Optical power / pulse energy1~1000 mW1~15 mW1~15 mW
Operating mode / pulse widthCW——
Beam quality<1.1——