Fiber output, PM options, seed formats
FL-1030-CW1030 nm near-infrared high-power fiber laser
1030 nmFL-1030-CW is a 1030 nm Fiber laser. Used for sapphire marking, ceramic cutting, semiconductor cutting, film scribing. CW or modulated. Key specifications: operating mode CW, output / average power 1~100 W, single pulse energy (nj) 1-500. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-1030-CW
22 specification rows
| Operating mode | CW |
|---|---|
| Output / average power | 1~100 W |
| Beam / notes | CW or modulated |
| Single pulse energy (nJ) | 1-500 |
| Rep. Rate( | 20-120 |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1 |
| M2 | <1.2 |
| Polarization ratio | >100:1 Vertical |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1030±1 |
| Average power (W) | 1-20 |
| Pulse duration (ps) | <10 |
| Peak power (MW) | 1-50 |
| Beam diameter at the aperture (1/e2,mm) | ~2 |
| M² | <1.2 |
| Beam height from base plate (mm) | 118 |
Applications
Uses named on this model’s datasheet.
- Sapphire marking
- Ceramic cutting
- Semiconductor cutting
- Film scribing
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-1030-CW with nearby fiber lasers across the wavelength range.
