PIV, confocal, wafer, marking systems
Up-conversion Luminescence is a 808, 980, 1532 nm Application Systems. We provide 808 nm, 980 nm, 1532 nm and other wavelengths laser sources for up-conversion luminescence. View specifications, datasheet and enquiry options from Precisometer.
Specifications
1 specification rows
| Wavelength | 808, 980, 1532 nm |
|---|---|
| Beam / notes | We provide 808 nm, 980 nm, 1532 nm and other wavelengths laser sources for up-conversion luminescence. |
Series-level technical context
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 12 nearby configurations on the same source-product record; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
M², full-angle divergence and pointing stability are not present in this thin record. Treat all three as required order-confirmation fields because they determine focusability, propagation and alignment drift.
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
Up-conversion Luminescence: 808, 980, 1532 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Up-conversion Luminescence: Laboratory measurement benefits from a stable, focusable source. 808, 980, 1532 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare Up-conversion Luminescence with the closest available models in the Application Systems family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Up-conversion Luminescence (current) | Confocal Laser Scanning Microscopy | Semiconductor wafer inspection |
|---|---|---|---|
| Wavelength | 808, 980, 1532 nm | Confirm for this model | Confirm for this model |
| Optical power / pulse energy | Confirm for this model | Confirm for this model | Confirm for this model |
| Operating mode / pulse width | Confirm for this model | Confirm for this model | Confirm for this model |
| Beam quality | Confirm for this model | Confirm for this model | Confirm for this model |
Compare the Up-conversion Luminescence with nearby application systems across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide