Fiber output, PM options, seed formats
MRL-U-631-SF is a 631 nm Fiber laser. Used for medical imaging, flow cytometry, dna sequencing, scientific research. Fiber laser High Stability Red Laser. Key specifications: output / average power 1~200 mW, operating mode CW, transverse mode TEM00. View specifications, datasheet and enquiry options from Precisometer.
Specifications
15 specification rows
| Output / average power | 1~200 mW |
|---|---|
| Beam / notes | Fiber laser High Stability Red Laser |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Beam diameter at the aperture (1/e2, mm) | ~3.0 |
| Polarization ratio | >100:1 |
| Cooled method | Air Cooled/ Water Cooled |
| Warm-up time (minutes) | <10 |
| Power supply (100-240VAC) | PSU-SF |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 631±2 |
| Output power (mW) | 1-200 |
| Power stability (rms, 4 hours±3℃) | <3%, <2%, (<1% optional@Water Cooled) |
| Beam divergence, full angle (mrad) | <3.0 |
| Beam height from base plate (mm) | 108@Air Cooled/ 61.5@Water Cooled |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
MRL-U-631-SF: 631 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<3%, <2%, (<1% optional@Water Cooled)) helps keep measured intensity changes attributable to the sample rather than source drift.
MRL-U-631-SF: 631 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<3%, <2%, (<1% optional@Water Cooled)) helps keep measured intensity changes attributable to the sample rather than source drift.
MRL-U-631-SF: 631 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<3%, <2%, (<1% optional@Water Cooled)) helps keep measured intensity changes attributable to the sample rather than source drift.
MRL-U-631-SF: 631 nm emission determines compatible optics, coatings and detectors for Scientific research. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
System integration
Use these checks to connect MRL-U-631-SF to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Air Cooled/ Water Cooled. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: TEM00 · Beam diameter at the aperture (1/e2, mm): ~3.0. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MRL-U-631-SF with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MRL-U-631-SF (current) | FL-631-SLM | FL-631-LN-L |
|---|---|---|---|
| Wavelength | 631 nm | 631 nm | 631 nm |
| Optical power / pulse energy | 1~200 mW | 1~1500 mW | 1~1500 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | TEM00 | TEM00 | TEM00 |
Compare the MRL-U-631-SF with nearby fiber lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide