Pulse energy, repetition rate, pulse width
MDL-PS-395 is a 395 nm Pulsed laser. Used for fluorescence excitation, time resolve spectrum, highly sensitive absorption spectroscopy. Picosecond Pulsed UV Laser. Key specifications: output / average power 1~50 mW, operating mode Pulsed, power stability (rms, 4 hours ± 3°c) <3%, <2%, <1%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
19 specification rows
| Output / average power | 1~50 mW |
|---|---|
| Beam / notes | Picosecond Pulsed UV Laser |
| Operating mode | Pulsed |
| Power stability (rms, 4 hours ± 3°C) | <3%, <2%, <1% |
| Pulse width (ps) | 200-1000 |
| Transverse mode | Near TEM00 |
| Rep. | 100kHz-20MHz |
| repetition | rate / 100kHz / to / 20MHz, |
| Beam divergence, full angle (mrad) | <0.5 |
| Warm-up time (minutes) | <5 |
| Cooled method | Air cooled |
| Operating temperature (°C) | 10-35 |
| Operating voltage (VDC) | 12V/3.34A |
| Expected lifetime (hours) | >10000 |
| Central wavelength (nm) | 395±5 |
| Peak power (mW) | 1-50 |
| Rep. rate | 100kHz-20MHz |
| Beam diameter at the aperture (1/e2, mm) | ~3.0 |
| Beam height from base plate (mm) | 26.5 |
Application context
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
MDL-PS-395: 395 nm emission can be matched to the absorption or excitation band used in Fluorescence excitation. The stated stability or noise figure (<3%, <2%, <1%) helps keep measured intensity changes attributable to the sample rather than source drift.
MDL-PS-395: 395 nm emission sets the excitation and detector-band choice for Time resolve spectrum; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (Near TEM00) also controls focusing and collection geometry.
MDL-PS-395: 395 nm emission sets the excitation and detector-band choice for Highly sensitive absorption spectroscopy; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (Near TEM00) also controls focusing and collection geometry.
System integration
Use these checks to connect MDL-PS-395 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Air cooled · Operating temperature (°C): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: Near TEM00 · Beam divergence, full angle (mrad): <0.5. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MDL-PS-395 with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MDL-PS-395 (current) | MDL-NS-395 | TUN-TiA-393-408 |
|---|---|---|---|
| Wavelength | 395 nm | 395 nm | 393 nm |
| Optical power / pulse energy | 1~50 mW | 1~100 mW | 1~1000 mW |
| Operating mode / pulse width | Pulsed | Pulsed | Q-switched |
| Beam quality | Near TEM00 | Near TEM00 | <4 |
Compare the MDL-PS-395 with nearby pulsed lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Photoacoustic imagingConnect optical absorption to wavelength, pulse fluence, stress confinement, acoustic bandwidth, repetition rate, and synchronization at the sample.
Open guide
Ultrafast spectroscopyDesign the pump, probe, delay line, monochromator, visible or SWIR camera, synchronization, and transient-signal budget as one experiment.
Open guide