Medical imaging
MDL-III-685-SM: 685 nm emission can be matched to the absorption or excitation band used in Medical imaging. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
Fiber output, PM options, seed formats
MDL-III-685-SM685 nm red fiber laser
685 nmMDL-III-685-SM is a 685 nm Fiber laser. Used for medical imaging, flow cytometry, dna sequencing, scientific research. Fiber output laser High Stability Red Laser. Key specifications: output / average power 1~20 mW. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MDL-III-685-SM
2 specification rows
| Wavelength | 685 nm |
|---|---|
| Output / average power | 1~20 mW |
| Beam / notes | Fiber output laser High Stability Red Laser |
Series-level technical context
Engineering context for a thin Fiber Lasers record
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 2 nearby configurations on the same source-product record; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
Typical operating fields in the series
- • Output / average power: 1~20 mW
- • Output / average power: 1~50 mW
- • Operating mode: CW
- • Power stability (rms, 4 hours ± 3°C): <2%, <1%, <0.5%
Beam-quality tolerance context
Nearby series records state M²: <1.1, M²: <1.5, Beam divergence, full angle (mrad): <1.5, and Beam divergence, full angle (mrad): <1.0. These are series context, not guaranteed values for MDL-III-685-SM; confirm them on the order-specific datasheet.
Optical integration schematic
- Step 1Laser source and internal thermal control
- Step 2Configured fiber launch or integrated pigtail
- Step 3Mode- and connector-matched patch lead
- Step 4Collimator, isolator or experiment input
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Flow cytometry
MDL-III-685-SM: 685 nm emission can be matched to the absorption or excitation band used in Flow cytometry. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
DNA sequencing
MDL-III-685-SM: 685 nm emission can be matched to the absorption or excitation band used in DNA sequencing. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
Scientific research
MDL-III-685-SM: 685 nm emission determines compatible optics, coatings and detectors for Scientific research. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MDL-III-685-SM with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MDL-III-685-SM (current) | TEM-F-685 | MDL-III-685L |
|---|---|---|---|
| Wavelength | 685 nm | 685 nm | 685 nm |
| Optical power / pulse energy | 1~20 mW | 1~20 mW | 1~50 mW |
| Operating mode / pulse width | Confirm for this model | CW | CW |
| Beam quality | Confirm for this model | TEM00 | <1.0 |
Related fiber lasers
Compare the MDL-III-685-SM with nearby fiber lasers across the wavelength range.
