Fiber output, PM options, seed formats
FL-775-Pico775 nm near-infrared fiber laser
775 nmFL-775-Pico is a 775 nm Fiber laser. Used for tcspc, picosecond processing, laser drilling, glass engraving. Polarization: >15dB; M²: <1.5; Transverse Mode: Multi-. Key specifications: output / average power 50-200 mW, repetition rate 0.1-20 MHz, pulse width 100-900 ps. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-775-Pico
20 specification rows
| Output / average power | 50-200 mW |
|---|---|
| Repetition rate | 0.1-20 MHz |
| Pulse width | 100-900 ps |
| Power stability | <5%, <3% |
| M² | <1.5 |
| Beam / notes | Polarization: >15dB; Transverse Mode: Multi- |
| Operating mode | Pulsed |
| Polarization ratio (dB) | >15 Horizontal (Vertical optional) |
| Cooled method | Air cooled |
| Operating temperature (℃) | 15-35 |
| Operating voltage (VDC) | 12V/11.5A |
| Expected lifetime (hours) | >10000 |
| Fundamental Frequency | Second harmonic |
| Wavelength (nm) | 775±1 |
| Average power (mW) | 1-200 |
| Pulse duration (ps) | 100-900 |
| Rep. rate | 100kHz-20MHz |
| Warm-up time (minutes) | <15 |
| Beam height from base plate (mm) | 30 |
| Delivery cable length (cm) | 60 |
Applications
Uses named on this model’s datasheet.
- TCSPC
- Picosecond processing
- Laser drilling
- Glass engraving
- Scientific research
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-775-Pico with nearby fiber lasers across the wavelength range.
