Power, wavelength, beam profile, safety
TS300+TP100 Laser Power Meter
- Display unit: TP100
- Sensor model: TS300
- Power Range: 0.5 W - 300 W
- Active Area Diameter: 25 mm
- Probe Coating Film: Broadband coating
- Probe Material: Thermopile

Model Specifications
TS300+TP100 Laser Power Meter
Model specifications
| Parameter | Specification |
|---|---|
| Display unit | TP100 |
| Sensor model | TS300 |
| Power Range | 0.5 W - 300 W |
| Active Area Diameter | 25 mm |
| Probe Coating Film | Broadband coating |
| Probe Material | Thermopile |
| Wavelength Range | 0.19-25 μm |
| Max. Average Power Density | 45 kW/cm² |
| Max. Energy Density | 0.3 J/cm², 1064 nm, 1 ns |
| Sensitivity | 0.01 W |
| Measurement Uncertainty | ±2% |
| Response Time (0-90%) | <1 sec. |
| Linearity | ±1% |
| Resolution | 0.01 W |
| Accuracy | <±2% |
| Power Supply | 18650 (2 batteries) |
| Cooling Method | Fan cooling |
| Computer Interface | USB 1.1 and USB 2.0 |
| Instrument Power | 100-240 V AC, 50/60 Hz, DC 12 V, 3.34 A |
| Temperature (Operating) | 5°C - 45°C (41°F - 113°F) |
| Temperature (Storage) | -20°C - 70°C (-4°F - 158°F) |
| Warranty Period | 1 year |
Measurement conditions
| Condition | Detail |
|---|---|
| Note 1 | Keep total optical power and average power density within the stated limits. Check the beam spot size before measurement. |
| Note 2 | The pulse-energy-density limit applies only under the listed wavelength, pulse-duration and repetition-rate conditions. It is separate from the average-power-density limit. |
Construction details
- Detector assembly: TS300.
Sensor, display and mechanical views


Need this configured?
Share measurement range, detector needs, interface requirements, mounting constraints and calibration needs, and we will qualify the matching configuration.