Back to Home

Technology guide

Pneumatic vibration isolation: air springs and resonance

Match load and disturbance frequency to an air-supported isolation system.

  1. 01Floor motion
  2. 02Air spring
  3. 03Supported mass
  4. 04Experiment
Conceptual operating path.

How it works

  • Pneumatic isolation supports a load using compressed air and a compliant support arrangement. The supported mass and effective spring behaviour establish mechanical resonances.
  • An isolator can amplify motion near resonance before attenuating disturbances at higher frequencies. Isolation performance is frequency dependent.
  • Levelling and damping influence practical operation. Static payload capacity alone does not describe settling, horizontal behaviour or performance with moving equipment.
  • The pressure supply and installation geometry belong to the support system. Their requirements must come from the selected isolator documentation.

What to compare

ParameterCheck in the specification
PayloadKeep the load distribution and each support's operating range with the rating.
Frequency responseRead vertical and horizontal transmissibility where available.
EnvironmentConsider floor motion, acoustic disturbance and air-supply quality.
Motion disturbancesAccount for moving stages, pumps and personnel contact with the supported assembly.

Integration

  • Place loads and supports according to the manufacturer's layout instructions.
  • Avoid stiff cable or hose paths that bypass the isolating support.
  • Confirm the air supply, levelling accessories and permissible operating pressure for the exact system.

Related products

References

Discuss the configuration. Send the travel, payload, trajectory and feedback requirements.