Back to Home

Technology guide

External-cavity diode lasers: feedback and tuning

Choose an ECDL around its tuning method, mode-hop behaviour and mechanical stability, not only the centre wavelength.

  1. 01Diode gain
  2. 02External feedback
  3. 03Wavelength selection
  4. 04Output
Conceptual operating path.

How it works

  • An external-cavity diode laser feeds selected light back into a semiconductor gain element from optics outside the chip. This feedback helps select and stabilise the emitted wavelength.
  • Grating and other external feedback layouts have different beam and tuning behaviour. An ECDL label does not establish a particular Littrow, Littman or proprietary arrangement.
  • Diode current, chip temperature and external-cavity length can all influence the operating point. A broad wavelength span is not necessarily continuously accessible without mode hops.
  • Mechanical and thermal stability matter because small cavity changes affect the optical frequency.

What to compare

ParameterCheck in the specification
Tuning rangeSeparate total accessible wavelength coverage from a continuous mode-hop-free scan.
LinewidthKeep measurement bandwidth, observation time and stability conditions with the value.
Control interfaceConfirm current, temperature, piezo or other actuator channels and their permitted inputs.
Output geometryCheck beam movement, polarization and available power over the required scan.

Integration

  • Define the wavelength scan and frequency stability needed by the experiment.
  • Check whether an isolator, controller or locking interface is included or optional.
  • Use the exact module's tuning instructions instead of applying a generic actuator range to every ECDL.

Related products

References

Discuss the configuration. Send the wavelength, output, pulse or CW mode and control requirements.