Back to Home

Technology guide

Deuterium lamps: ultraviolet continuum and optical coupling

Choose a deuterium source around the useful UV band, window transmission and collection geometry.

  1. 01Electrical discharge
  2. 02Deuterium emission
  3. 03UV window
  4. 04Optical delivery
Conceptual operating path.

How it works

  • A deuterium lamp uses an electrical discharge to produce ultraviolet emission. It is used where a continuum source is needed for spectral measurements.
  • The lamp window and surrounding optics limit the useful output band. A lamp designation does not establish transmission through every connected fiber or lens.
  • The emitting region and collection geometry influence how much radiation reaches a small slit or aperture.
  • Lamp stability, warm-up and the receiving detector response affect a complete spectroscopic measurement.

What to compare

ParameterCheck in the specification
Working bandUse the source spectrum together with window, fiber and detector transmission.
Optical acceptanceMatch the collection optics and entrance aperture.
Supply and ignitionUse the specified electrical supply and start-up sequence.
Reference measurementCheck output drift and the method used to normalise spectra.

Integration

  • Confirm whether the product is a bare lamp, a housed source or a combined multi-lamp assembly.
  • Read operating and handling limits in the actual lamp documentation.
  • Measure the delivered spectral response when the complete optical chain is assembled.

Related products

References

Discuss the configuration. Send the spectrum, sample area, delivered output and timing requirements.