Swapping filters mid-experiment
Change spectral band without disturbing the alignment of the surrounding path.
Filter Mounts · NFH series Filter Mount
NFH15-75
NFH series Filter Mount
NFH series Filter Mount — model NFH15-75.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where NFH15-75 fits
NFH15-75 is listed as NFH series Filter Mount in the NFH series Filter Mount family. The local catalog record provides these first selection fields: Optics Thickness(mm): ≤15; Height(mm): 22; Pitch(mm): 1.
Specifications
| Optics Thickness(mm) | ≤15 |
|---|---|
| Height(mm) | 22 |
| Pitch(mm) | 1 |
| Lock-Mechanism | yes |
| Mounting Hole | M6，Counterboreφ8 |
| Weight(g) | 155 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Fluorescence and Raman filtering
Hold excitation, emission and notch filters at the correct orientation to the beam.
Neutral density and attenuation
Set power levels reproducibly ahead of a detector or sample.
System integration
Integration and compatibility
Use these checks to connect NFH15-75 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optic it accepts
- Optics Thickness(mm): ≤15
- Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
- Mounting interface
- Mounting Hole: M6，Counterboreφ8
- Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
- Adjustment
- Pitch(mm): 1
- Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
- Dimensions and mass
- Height(mm): 22 · Weight(g): 155
- Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Technical FAQ
Integration questions for NFH15-75
Which optics fit the NFH15-75?
Optics Thickness(mm): ≤15. Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
How does the NFH15-75 mount?
Mounting Hole: M6，Counterboreφ8. Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
What adjustment range does the NFH15-75 offer?
Pitch(mm): 1. Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
What are the dimensions of the NFH15-75?
Height(mm): 22 · Weight(g): 155. Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Model selection
Nearby series comparison
Compare NFH15-75 with the closest available models in the NFH series Filter Mount family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | NFH15-75 (current) | NFH15-25 |
|---|---|---|
| Optic accepted | ≤15 | ≤15 |
| Adjustment | Confirm for this model | Confirm for this model |
| Mounting interface | M6，Counterboreφ8 | M6，Counterboreφ8 |
| Material | Confirm for this model | Confirm for this model |
