Optical Switches
The Fiber-Fiber ™ series 1×2 fiber optical switches offer exceptionally low optical loss of about 0.2dB, intrinsic broad wavelength coverage without any optical coatings (transmitting light of all wavelengths in the fiber), high optical power handling, and availability in all fiber types, including single mode, multimode, polarization-maintaining, double cladding, and special fibers. The superior performance is achieved through our patent-pending MEMS technology, in which light propagates in a continuous medium without interruptions. For volume discounts, please email.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Configuration: 1x2 · Fiber Type: SM450 · Cable Diameter: 0.9mm · Fiber Length: 0.5m · Driver Type: None · Connectors: None
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Ultra Fiber Optical 1x2 Switch: Optical signal routing depends on preserving the optical budget through the complete path.. The fiber/interface entry (SM450, SM600, Hi780, SM800, Hi1060, SM28, SM2000, PM480, PM630, PM780, PM850, PM980, PM1550, PM1950, GIF50, GIF625, FG50LGA, FG105LCA, FG10LDA) must match the connected components.
Ultra Fiber Optical 1x2 Switch: Automated fiber test depends on preserving the optical budget through the complete path.. The fiber/interface entry (SM450, SM600, Hi780, SM800, Hi1060, SM28, SM2000, PM480, PM630, PM780, PM850, PM980, PM1550, PM1950, GIF50, GIF625, FG50LGA, FG105LCA, FG10LDA) must match the connected components.
System integration
Use these checks to connect Ultra Fiber Optical 1x2 Switch to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: SM450, SM600, Hi780, SM800, Hi1060, SM28, SM2000, PM480, PM630, PM780, PM850, PM980, PM1550, PM1950, GIF50, GIF625, FG50LGA, FG105LCA, FG10LDA · Fiber Length: 0.5m, 1.0m, 1.5m. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Driver Type: None, Pushbutton and USB Interface With GUI. Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Ultra Fiber Optical 1x2 Switch with the closest available models in the Optical Switches family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Ultra Fiber Optical 1x2 Switch (current) | Seamless Optical Channel Monitoring System | Ultra Low-Loss/Broadband/Large Core/Latching 1×N Fiber Switch/VOA |
|---|---|---|---|
| Wavelength range | Confirm for this model | Confirm for this model | 1550, 1060, 1310, 2000, 650, 780, 850, 1310/1550, 350, 450, 520 |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | SM450, SM600, Hi780, SM800, Hi1060, SM28, SM2000, PM480, PM630, PM780, PM850, PM980, PM1550, PM1950, GIF50, GIF625, FG50LGA, FG105LCA, FG10LDA | Confirm for this model | 50/125, 62.5/125, 105/125, 100/140, 200/NA.22, 300/NA.22, 400/NA.22, 600/NA.22, 800/NA.22, 1000/NA.22, 2000/NA.22, SMF-28, PM1550, SM400, SM450, SM600, 780HP, Hi1060, SM1950, PM1950 |
| Connector / control | None, Pushbutton and USB Interface With GUI | Confirm for this model | None, FC/PC, FC/APC, SC/PC, ST/PC, SMA |
