Optical Switches

Power Supply DDC 12 250

Power Supply ±12VDC, 0.25A. Detectors, Amplifiers

Configure & add to enquiry Datasheet (PDF)Back to Optical Switches

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

Output VoltageOutput CurrentPolarityConnector Type

Part number: DDC-120221

Output Voltage: ±12VDC · Output Current: 0.25A · Polarity: + - · Connector Type: M8 3 Pin Connector

Downloads

Datasheets & documents

Power Supply DDC 12 250

System integration

Integration and compatibility

Use these checks to connect Power Supply DDC 12 250 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optical interface and fiber: Connector Type: M8 3 Pin Connector; Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Control interface: Output Voltage: ±12VDC; Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.

Technical FAQ

Integration questions for Power Supply DDC 12 250

Which fiber and connector does the Power Supply DDC 12 250 use?

Connector Type: M8 3 Pin Connector. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

Does the Power Supply DDC 12 250 require a controller?

Output Voltage: ±12VDC. Match supply voltage, analog or digital command range, connector pinout and default optical state to the instrument interlock. Confirm the unpowered state explicitly — it decides what happens to the link on a power failure.