Polarization & Phase Control

Polarization-Maintaining (PM) / Multicore / Photonic-Crystal Fiber Fusion Splicer

The TUNE PM 500 Splicer is an innovative device designed for fusion splicing polarization-maintaining (PM) fibers. It enhances traditional fusion splicing by incorporating manual rotary fiber holders and specialized software, enabling precise manual alignment of PM fiber axes while automating core alignment. This combination ensures low-loss, high-strength splices. Operators can manually rotate the fiber holders to align the PM axes by visually matching stress patterns displayed on the device, allowing for splicing at various angular offsets, such as 90 or 45 degrees. Once aligned, the splicer automates the fusion process with a single button press.

Configure & add to enquiry Datasheet (PDF)Back to Polarization & Phase Control

Polarization-Maintaining (PM) / Multicore / Photonic-Crystal Fiber Fusion Splicer

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

Fiber DiameterBatteryLive ER MeasurementEnd Face Monitoring

Part number: PMSPL-55510011

Fiber Diameter: 125µm · Battery: Yes · Live ER Measurement: No · End Face Monitoring: Yes

Downloads

Datasheets & documents

System integration

Integration and compatibility

Use these checks to connect Polarization-Maintaining (PM) / Multicore / Photonic-Crystal Fiber Fusion Splicer to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optical interface and fiber: Fiber Diameter: 125µm, 80µm, Special; Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

Technical FAQ

Integration questions for Polarization-Maintaining (PM) / Multicore / Photonic-Crystal Fiber Fusion Splicer

Which fiber and connector does the Polarization-Maintaining (PM) / Multicore / Photonic-Crystal Fiber Fusion Splicer use?

Fiber Diameter: 125µm, 80µm, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.