Optical Switches
High Power 1×2 High Speed Optical Switch: 10W, 100ns, 18dB On/Off
The NanoSpeed™ Series 1×2 solid-state fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output optical fiber. We achieve this using patent non-mechanical configurations with solid-state all-crystal designs, which eliminate the need for mechanical movement and organic materials. The device is intrinsically bidirectional and exhibits variable coupler behavior, allowing light to be transferred from one port to another without loss. The NS fiber optic switch is designed to meet the most demanding switching requirements, offering ultra-high reliability, fast response time, and continuous switching operation. The switch is intrinsically bidirectional and can be selected for polarization-independent or polarization-maintained operation according to the fiber type.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Prefix: NSSW · Type: 1x2 · Wavelength: 1060nm · Configuration: Single stage & normal power · Package: Regular package A for ≤0.5W · Fiber Type: SMF-28 · Fiber Cover: Bare fiber · Fiber Length: 0.25m · Connector: None · Benchtop: None
System integration
Integration and compatibility
Use these checks to connect High Power 1×2 High Speed Optical Switch: 10W, 100ns, 18dB On/Off to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SMF-28, HI1060, PM1550, PM980, MM50/125 · Fiber Cover: Bare fiber, 900um tube
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1060nm, 1310nm, 1410nm, 1550nm, 1750nm, 980nm
- Check the Optical Switches passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for High Power 1×2 High Speed Optical Switch: 10W, 100ns, 18dB On/Off
Which fiber and connector does the High Power 1×2 High Speed Optical Switch: 10W, 100ns, 18dB On/Off use?
Fiber Type: SMF-28, HI1060, PM1550, PM980, MM50/125 · Fiber Cover: Bare fiber, 900um tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the High Power 1×2 High Speed Optical Switch: 10W, 100ns, 18dB On/Off be included in an optical power budget?
Wavelength: 1060nm, 1310nm, 1410nm, 1550nm, 1750nm, 980nm. Check the Optical Switches passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
