Optical Switches
1×2 Broad Wavelength Fiber Optical Switch: 100ns, 18dB On/Off
The NanoSpeed™ Series 1×2 solid-state fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output optical fiber. This is achieved using patent non-mechanical configurations with solid-state all-crystal designs, eliminating the need for mechanical movement and organic materials. The broadband series of we fiber optic switches is designed to meet the most operation requirements of wavelength band in addition to ultra-high reliability, fast response time, and continuous switching operation. This series of switches is intrinsically bidirectional and selectable for polarization-independent or polarization-maintain by the fiber type. The we Series switch is controlled by 5V TTL signals with a specially designed electronic driver having performance optimized for various repetition rates.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Prefix: NSBW · Type: 1x2 · Wavelength: 1260~1620nm · Configuration & Package: Single stage & Normal package · Fiber Type: SMF-28 · Fiber Cover: Bare fiber · Fiber Length: 0.25m · Connector: None · Optical Power: Regular · Benchtop: None
Downloads
Datasheets & documents
System integration
Integration and compatibility
Use these checks to connect 1×2 Broad Wavelength Fiber Optical Switch: 100ns, 18dB On/Off to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SMF-28, HI1060, PM 1550, PM980, MM50/125, Special · Fiber Cover: Bare fiber, 900um loose tube, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1260~1620nm, 960~1200nm, 1750nm, 2000nm
- Check the Optical Switches passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for 1×2 Broad Wavelength Fiber Optical Switch: 100ns, 18dB On/Off
Which fiber and connector does the 1×2 Broad Wavelength Fiber Optical Switch: 100ns, 18dB On/Off use?
Fiber Type: SMF-28, HI1060, PM 1550, PM980, MM50/125, Special · Fiber Cover: Bare fiber, 900um loose tube, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 1×2 Broad Wavelength Fiber Optical Switch: 100ns, 18dB On/Off be included in an optical power budget?
Wavelength: 1260~1620nm, 960~1200nm, 1750nm, 2000nm. Check the Optical Switches passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
