Optical Modulators
Fiber Optical Phase Modulator/Switch - NanoSpeed™
The NS Series fiber optical phase modulator/switch is a device based on a patented electro-optical configuration, featuring low optical loss and wide temperature operation with built-in compensation. The device is a bidirectional two-port equipment in which the input and output ports are interchangeable. The device dynamically controls the optical phase of the transmitting light, meeting the most demanding requirements of continuous operations over 25 years and non-mechanical ultra-high reliability (passed Telcordia and space qualifications). The switch is intrinsically bidirectional and selectable for polarization-independent or polarization-maintain by the fiber type. For high-frequency resonance configuration, the device has an integrated circuit inside that only requires a 5V AC input signal matching the resonance frequency.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Type: Standard · Wavelength: 1060 · Phase Change: 180º · Repetition Rate: Digital 100kHz · Fiber Type: SMF-28 · Fiber Cover: 0.9mm tube · Fiber Length: 1.0 m · Connector: None · Benchtop: Non
System integration
Integration and compatibility
Use these checks to connect Fiber Optical Phase Modulator/Switch - NanoSpeed™ to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SMF-28, HI1060, PM1550, PM980, Special · Fiber Cover: 0.9mm tube
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1060, 1310, 1550, 1625, 850, Special
- Check the Optical Modulators passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for Fiber Optical Phase Modulator/Switch - NanoSpeed™
Which fiber and connector does the Fiber Optical Phase Modulator/Switch - NanoSpeed™ use?
Fiber Type: SMF-28, HI1060, PM1550, PM980, Special · Fiber Cover: 0.9mm tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the Fiber Optical Phase Modulator/Switch - NanoSpeed™ be included in an optical power budget?
Wavelength: 1060, 1310, 1550, 1625, 850, Special. Check the Optical Modulators passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Related optical modulators
DC-1MHz Driver for NanoSpeed™ Variable Optic Attenuator- DC-100kHz Driver for NanoSpeed™ Variable Optic Attenuator
DC-20kHz Driver for NanoSpeed™ Variable Optic Attenuator
High Speed Variable Fiber Optical Attenuator Array (up to 48 Channels)
High Speed Broadband Variable Optical Attenuator 950-2400nm, 120nm Coverage- High Speed Premium Broadband Variable Optical Attenuator 350-2400nm, 120nm Coverage