Optical Switches
Dual-Stage High Power 1×1 Fiber Optical Switch: 10W, 100ns, 35dB On/Off
The NS Series dual-stage 1×1 solid-state fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output optical fiber. This is achieved using patent-pending non-mechanical configurations with solid-state all-crystal designs, eliminating the need for mechanical movement and organic materials. The dual-stage series of NS fiber-optic switches is designed to meet the demand of high cross-talk in addition to ultra-high reliability, fast response time, and continuous switching operation. The switch is intrinsically bidirectional and selectable for polarization-independent or polarization-maintaining by the fiber type. Our PCB driver listed on the web is recommended to operate this device, featuring high efficiency and low cost with 12V DC power and TTL control signal.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Prefix: NSSW · Type: Transparent · Wavelength: 1060nm · Configuration: Dual Stage · Optical Power: Regular (≤ 0.5W) · Fiber Type: SMF-28 · Fiber Cover: Bare fiber · Fiber Length: 0.25m · Connector: None · Benchtop: None
Downloads
Datasheets & documents
System integration
Integration and compatibility
Use these checks to connect Dual-Stage High Power 1×1 Fiber Optical Switch: 10W, 100ns, 35dB On/Off to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SMF-28, HI1060, PM1550, PM980, MM50/125 · Fiber Cover: Bare fiber, 900um tube
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength: 1060nm, 1310nm, 1410nm, 1550nm, 1625nm, 1750nm, 980nm
- Check the Optical Switches passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for Dual-Stage High Power 1×1 Fiber Optical Switch: 10W, 100ns, 35dB On/Off
Which fiber and connector does the Dual-Stage High Power 1×1 Fiber Optical Switch: 10W, 100ns, 35dB On/Off use?
Fiber Type: SMF-28, HI1060, PM1550, PM980, MM50/125 · Fiber Cover: Bare fiber, 900um tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the Dual-Stage High Power 1×1 Fiber Optical Switch: 10W, 100ns, 35dB On/Off be included in an optical power budget?
Wavelength: 1060nm, 1310nm, 1410nm, 1550nm, 1625nm, 1750nm, 980nm. Check the Optical Switches passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare Dual-Stage High Power 1×1 Fiber Optical Switch: 10W, 100ns, 35dB On/Off with the closest available models in the Optical Switches family.
| Selection parameter | Dual-Stage High Power 1×1 Fiber Optical Switch: 10W, 100ns, 35dB On/Off (current) | Duplex Fiber Optical A/B/C/D Switch |
|---|---|---|
| Wavelength range | 1060nm, 1310nm, 1410nm, 1550nm, 1625nm, 1750nm, 980nm | 1270-1620nm, 850/1310nm, 1310nm, 850nm |
| Fiber type | SMF-28, HI1060, PM1550, PM980, MM50/125 | SMF28e, MM50/125, MM62.5/125, Special |
| Connector / control | None, FC/APC, Special | ST Simplex, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC/PC, Duplex LC/PC, LC/UPC, MPO, HER FC/PC, HRE FC/APC |
