Optical Switches
MEMP The MEMS 1×8 Series Fiber Optic Switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using our patented configuration and is activated via an electrical control signal. We uniquely feature rugged thermal activated micro-mirror movement instead of rotation, offering unprecedented high stability as well as an unmatched low cost.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Configuration: 1x5 · Wavelength: 1260~1620 · Latching Status: Non-Latching · Switch Type: Standard · Fiber Type: SMF-28 · Fiber Cover: 900um loose tube · Fiber Length: 0.25m · Connectors: None
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
MEMS 1x8 Fiber Optical Switch/VOA: Optical signal routing depends on preserving the optical budget through the complete path. The 1260~1620, 1310, 1550, 1310 & 1550, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, Panda 250, Special) must match the connected components.
MEMS 1x8 Fiber Optical Switch/VOA: Automated fiber test depends on preserving the optical budget through the complete path. The 1260~1620, 1310, 1550, 1310 & 1550, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, Panda 250, Special) must match the connected components. The Standard, Default, Special dynamic specification sets the usable control bandwidth.
Downloads
System integration
Use these checks to connect MEMS 1x8 Fiber Optical Switch/VOA to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: SMF-28, Panda 250, Special · Fiber Cover: 900um loose tube, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1260~1620, 1310, 1550, 1310 & 1550, Special. Check the Optical Switches passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare MEMS 1x8 Fiber Optical Switch/VOA with the closest available models in the Optical Switches family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MEMS 1x8 Fiber Optical Switch/VOA (current) | MEMS 1x8 Fiber Optical Switch >70dB Crosstalk | MEMS 1xN Fiber Optical Switch 1310-1650 nm — 2D |
|---|---|---|---|
| Wavelength range | 1260~1620, 1310, 1550, 1310 & 1550, Special | Confirm for this model | 1280-1650nm, 1550nm, 1310nm, 1310/1550nm, 850nm, 760-1360nm, 1060nm, 980nm, 780nm, 1950nm, 895nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | SMF-28, Panda 250, Special | Confirm for this model | SM28, 50/125, Hi1060, PM1550, 62.5/125, 105/125, SM600, SM1950, SM800, 780HP, PM850, PM980, PM1310 |
| Connector / control | None, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC, Duplex LC, Special | Confirm for this model | UART, USB/TTL, RS232/TTL, Bare |
