Back to Home

Polarization & Phase Control

High Power Fiber Inline Polarizer

The High Power Fiber In-line Polarizer is designed to pass light with one specific polarization while blocking the other polarization. It can be used to convert no-polarized light into polarized light with high extinction ratio. It can also be used to enhance the extinction ratio of signals with its polarization properties. We offer all possible fiber coupling combinations: PM to PM, SM to PM, SM to SM. It has a third port to guide the unwanted light out. Our design minimizes component assembly costs and module footprint while increasing stability over a wide temperature and wavelength ranges.

High Power Fiber Inline Polarizer

Downloads

Datasheets & documents

Need this configured?

Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.

Model selection

Nearby series comparison

Compare High Power Fiber Inline Polarizer with the closest available models in the Polarization & Phase Control family. Confirm option-dependent values on the final configuration before ordering.

Selection parameterHigh Power Fiber Inline Polarizer (current)Fiber Scrambler/De-Speckler – 10kHz Voice-CoilHigh Precision No Drift Polarization Controller – Repeatable, USB
Wavelength rangeConfirm for this modelConfirm for this model1550nm, 1310nm, 1060nm, 980nm, 850nm, Special
Optical performanceConfirm for this modelConfirm for this modelConfirm for this model
Fiber typeConfirm for this model105µm NA 0.22, 200µm NA 0.22, 400µm NA 0.22, 600µm NA 0.22, Square 200x200µm NA 0.22, Square 400x400µm NA 0.22Confirm for this model
Connector / controlConfirm for this modelNone, FC/PC, SMA, SpecialUSB