Polarization & Phase Control
The In-line Polarizer is designed to pass light with one specific polarization while blocking the other polarization. It can be used to convert non-polarized light into polarized light with a high extinction ratio. It can also be used to enhance the extinction ratio of signals with its polarization properties. We offer all possible fiber coupling combinations: PM to PM, SM to PM, SM to SM. High power version is also available in which a third port is added to guide the unwanted light out. Our design minimizes component assembly costs and module footprint while increasing stability over a wide temperature and wavelength ranges.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength (nm): 1060 · Package: Standard · Input Fiber: SMF-28 · Output Fiber: PM 1550 · Power: 200mW · Fiber Cover: 900µm loose tube · PER: greater than 18 · Fiber Length: 0.25m · Connectors: None
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Fiber Inline Polarizer: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1060, 1310, 1420, 1550, 980, 850, 780, 650, 550, 450, 400, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, PM 1550, PM1310, Hi1060, Special) must match the connected components.
Fiber Inline Polarizer: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1060, 1310, 1420, 1550, 980, 850, 780, 650, 550, 450, 400, Special wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, PM 1550, PM1310, Hi1060, Special) must match the connected components.
System integration
Use these checks to connect Fiber Inline Polarizer to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Input Fiber: SMF-28, PM 1550, PM1310, Hi1060, Special · Output Fiber: PM 1550, PM1310, PM1060, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength (nm): 1060, 1310, 1420, 1550, 980, 850, 780, 650, 550, 450, 400, Special. Check the Polarization & Phase Control passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Fiber Inline Polarizer with the closest available models in the Polarization & Phase Control family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Fiber Inline Polarizer (current) | Automatic Polarization Controller With Buit-In Polarimeter | Fiber Polarization Controller – 0.5dB Loss, 2Hz, USB |
|---|---|---|---|
| Wavelength range | 1060, 1310, 1420, 1550, 980, 850, 780, 650, 550, 450, 400, Special | 1550nm, 1310nm, 1060nm, 980nm, 850nm | 488, 532, 650, 780, 850, 980, 1060, 1310, 1550, 2000 |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | Confirm for this model | SMF-28, SM450, 460HP, SM600, 780HP, SM800, Hi1060, SM1950, PM400, PM460, PM630, PM780, PM850, PM980, PM1550, PM1950 |
| Connector / control | None, FC/PC, FC/APC, SC/PC, SC/APC, LC/PC, LC/APC, LC/UPC, FC/PC5W, FC/APC5W, FC/PC10W, Special | None, FC/APC, Special | FC/APC, Special |
Fiber Polarization Controller Piezoelectric – 0.5dB, 100kHz
All Fiber Piezoelectric Polarization Scrambler/Depolarizer
Automatic Polarization Controller With Buit-In Polarimeter
Fiber Scrambler/De-Speckler – 10kHz Voice-Coil
Piezoelectric Fiber Scrambler/De-Speckler – 150kHz
High Precision No Drift Polarization Controller – Repeatable, USB