Optical Switches
CrystaLatch™ 1x2 High Power Series Fiber Optic Switch – >10W
The CL 1×2 High Power (>10W) series Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all High Power fiberoptic switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment, and large temperature variations, and fast response time. The switch also has build-in Circulator and isolator functions. Electronic driver is available for this series of switches.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: CLHP-1131H1331
Prefix: CLHP · Type: 1x1 · Switch: Single Stage · Package: > 10W · Fiber Type: SMF-28 · Fiber Cover: 900 μm tube · Fiber Length: 1.0m · Connector: None
Downloads
Datasheets & documents
System integration
Integration and compatibility
Use these checks to connect CrystaLatch™ 1x2 High Power Series Fiber Optic Switch – >10W to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SMF-28, PM 1550, PM 1310 · Fiber Cover: 900 μm tube
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Technical FAQ
Integration questions for CrystaLatch™ 1x2 High Power Series Fiber Optic Switch – >10W
Which fiber and connector does the CrystaLatch™ 1x2 High Power Series Fiber Optic Switch – >10W use?
Fiber Type: SMF-28, PM 1550, PM 1310 · Fiber Cover: 900 μm tube. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
