Optical Switches
100GHz 40 Channel Dense Wavelength Division Multiplexer
Our Wavelength Division Multiplexer (WDM) is based on thin-film filter technology. This proven technology offers wide channel bandwidth, flexible channel configuration, low insertion loss, and high isolation. The DWDM series modules are used to add or drop particular wavelengths and are ideal for telecommunications and networking. Our DWDM modules are Bellcore GR-1221 qualification tested and are epoxy-free in the optical path.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: DWDM
Configuration: With 1310 port · Package: 1RU 19’rack box · Monitor: With tap monitor · Connector: Duplex LC · DWDM ITU channel: C1
System integration
Integration and compatibility
Use these checks to connect 100GHz 40 Channel Dense Wavelength Division Multiplexer to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Connector: Duplex LC, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Technical FAQ
Integration questions for 100GHz 40 Channel Dense Wavelength Division Multiplexer
Which fiber and connector does the 100GHz 40 Channel Dense Wavelength Division Multiplexer use?
Connector: Duplex LC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
