Zolix · Motorized Stages
TBZF6-60 Motorized Vertical Stage
Motorized vertical stage with 6 mm travel and a 60×60 mm table. Transmission: ball screws φ6×1; guide: linear-slider guides. Repositioning accuracy ≤±2.5 µm; max speed 7 mm/s. Horizontal load capacity 4 kg; weight 0.8 kg.
- Travel range
- 6 mm
- Repositioning accuracy
- ≤±2.5 µm
- Horizontal load capacity
- 4 kg
- Table size
- 60×60 mm
Specifications
Mechanical
| Travel range (mm) | 6 |
|---|---|
| Table size (mm) | 60×60 |
| Transmission mechanism | Ball screws φ6×1 |
| Guide mechanism | Linear-slider guides |
| Body material and finish | Black anodized aluminum alloy |
| Weight (kg) | 0.8 |
Accuracy
| Resolution, full/half step (µm) | 3.5/1.75 |
|---|---|
| Resolution, 20× microstep (µm) | 0.175 |
| Max speed (mm/s) | 7 |
| Repositioning accuracy (µm) | ≤±2.5 |
| Backlash (µm) | ≤5 |
| Static parallelism (mm) | ≤0.1 |
Motor & electrical
| Motor and step angle (°) | Two-phase 28 stepping motor, 1.8 |
|---|---|
| Motor model | Shinano, STP-28D1003-08 |
| Motor current (A) | 1.3 |
| Motor holding torque (N·m) | 0.0785 |
| Stepper driver (optional) | Moons, SR2 |
| Self-locking after power off | No |
Sensors & connection
| Connector | DB9 (pin) |
|---|---|
| Cable type | Ordinary cable |
| Cable length (m) | 0.2 |
| Limit sensors (built-in) | 2×PM-L25 (SUNX, Japan) |
| Origin sensor (built-in) | 1×PM-L25 (SUNX, Japan) |
| Sensor supply voltage | DC5~24V±10% |
| Sensor output | NPN open-collector output DC5~24V 8mA or less Residual voltage 0.3V or less (when load current is 2mA) |
| Sensor output logic | Position-limit sensor: Output ON when sensor is blocked (conduction); Zero position sensor: Output OFF when sensor is blocked (Non conduction); |
Load capacity
| Horizontal load capacity (kg) | 4 |
|---|
Compatible controllers
For the two-phase 28 stepping motor this stage uses.