Zolix · Motorized Stages
TBZF30-200 Motorized Vertical Stage
Motorized vertical stage with 30 mm travel and a 200×200 mm table. Transmission: grinding screws φ12×2; guide: linear-slider guides. Repositioning accuracy ≤±2.5 µm; max speed 13 mm/s. Horizontal load capacity 20 kg; weight 11.5 kg.
- Travel range
- 30 mm
- Repositioning accuracy
- ≤±2.5 µm
- Horizontal load capacity
- 20 kg
- Table size
- 200×200 mm
Specifications
Mechanical
| Travel range (mm) | 30 |
|---|---|
| Table size (mm) | 200×200 |
| Transmission mechanism | Grinding screws φ12×2 |
| Guide mechanism | Linear-slider guides |
| Body material and finish | Black anodized aluminum alloy |
| Weight (kg) | 11.5 |
Accuracy
| Resolution, full/half step (µm) | 6.49/3.245 |
|---|---|
| Resolution, 20× microstep (µm) | 0.325 |
| Max speed (mm/s) | 13 |
| Repositioning accuracy (µm) | ≤±2.5 |
| Backlash (µm) | ≤5 |
| Static parallelism (mm) | ≤0.1 |
Motor & electrical
| Motor and step angle (°) | Two-phase 57 stepping motor, 1.8 |
|---|---|
| Motor model | Shinano, SST59D3206 |
| Motor current (A) | 2.8 |
| Motor holding torque (N·m) | 1.41 |
| Stepper driver (optional) | Moons, SR4 |
Sensors & connection
| Connector | DB9 (pin) |
|---|---|
| Cable type | High flexibility cable (Helukabel, Germany) |
| Cable length (m) | 0.2 |
| Limit sensors (built-in) | 2×GP1S09xHCPI (SHARP, Japan) |
| Origin sensor (built-in) | 1×GP1S09xHCPI (SHARP, Japan) |
| Sensor supply voltage | DC5~24V±10% |
| Sensor output | NPN open-collector output DC5~24V 8mA or less Residual voltage 0.3V or less (when load current is 2mA) |
| Sensor output logic | Output ON when sensor is blocked |
Load capacity
| Horizontal load capacity (kg) | 20 |
|---|
Compatible controllers
For the two-phase 57 stepping motor this stage uses.