Zolix · Motorized Stages
TBR60L Motorized Rotation Stage
Motorized rotation stage with 360° rotation, a φ59 mm table and a φ20 H7 centre bore. Transmission: worm gear and worm, 180:1; guide: angular contact ball bearing. Repositioning accuracy ≤±0.005°; max speed 20°/s. Horizontal load capacity 5 kg; weight 0.7 kg.
- Repositioning accuracy
- ≤±0.005°
- Horizontal load capacity
- 5 kg
- Angle range
- 360°
- Table diameter
- φ59 mm
Specifications
Mechanical
| Angle range (°) | 360 |
|---|---|
| Table diameter (mm) | φ59 |
| Centre bore (mm) | φ20 H7 |
| Transmission mechanism | Worm gear and worm |
| Worm gear ratio | 180:1 |
| Worm gear material | Durable tin bronze worm gear |
| Worm material and treatment | Steel, high frequency quenched |
| Guide mechanism | Angular contact ball bearing |
| Body material and finish | Black anodized aluminum alloy |
| Weight (kg) | 0.7 |
| Shaft coupling, OD-bore-bore (mm) | 19-4-5 |
Accuracy
| Resolution, full/half step (°) | 0.01/0.005 |
|---|---|
| Max speed (°/s) | 20 |
| Repositioning accuracy (°) | ≤±0.005 |
| Backlash (°) | ≤0.01 |
| Static parallelism (mm) | ≤0.08 |
| Static clearance (µm) | ≤8 |
| Axial runout (µm) | ≤40 |
| Radial runout (µm) | ≤25 |
Motor & electrical
| Motor brand | Jigocheng (28 stepping motor) |
|---|---|
| Motor model | 28BYG003-C, two-phase |
| Step angle (°) | 1.8 |
| Insulation resistance | Over 100 MΩ/min |
| Insulation strength | 500 V AC for 1 minute, no abnormality |
| Insulation class | Class B |
| Motor weight (kg) | 0.14 |
| Motor voltage (V) | 3.3 |
| Motor current (A/phase) | 1.0 |
| Resistance (Ω/phase) | 3.3±10% |
| Inductance (mH/phase) | 2.5±20% |
| Motor holding torque (N·m) | 0.1 |
| Braking torque (N·m) | 0.005 (reference value) |
| Rotor inertia (g·cm²) | 11 |
| Operating temperature (°C) | -10~+50 |
| Max motor temperature (°C) | 80 |
| Stepper driver (optional) | Moons, SR2 |
Sensors & connection
| Connector | DB9 (pin) |
|---|---|
| Cable type | High flexibility cable |
| Cable length (m) | 0.2 |
| Limit sensors (built-in) | None |
| Origin sensor (built-in) | 1×GP1S09xHCPI (SHARP, Japan) |
| Sensor supply voltage | DC5-24V±10% |
| Sensor current consumption (mA) | <60 (total) |
| Sensor output | NPN open-collector output DC5~24V 50mA or less |
| Sensor output logic | NPN open-collector output DC5~24V 50mA or less |
Load capacity
| Horizontal load capacity (kg) | 5 |
|---|---|
| Vertical load capacity (kg) | 2 |
| Inverted load capacity (kg) | 5 |
Compatible controllers
For the two-phase 28 stepping motor this stage uses.