Zolix · Motorized Stages
PSAG15-250 Motorized Goniometer
Motorized goniometer with ±15° tilt range and a 250×250 mm table. Transmission: worm gear 610:1; guide: arc V-shaped ball guide. Max speed ≈5.9°/s. Horizontal load capacity 30 kg; weight 14.8 kg.
- Horizontal load capacity
- 30 kg
- Table size
- 250×250 mm
- Angle range
- ±15°
- Overall height
- 110±0.1 mm
Specifications
Mechanical
| Table size (mm) | 250×250 |
|---|---|
| Angle range (°) | ±15 |
| Overall height (mm) | 110±0.1 |
| Worm gear ratio | 610:1 |
| Guide mechanism | Arc V-shaped ball guide |
| Worm gear material | Brass |
| Worm material and treatment | Steel, high-frequency quench |
| Body material and finish | Black anodized aluminum alloy |
| Weight (kg) | 14.8 |
| Shaft coupling, OD-bore-bore (mm) | 30-6.35-10 |
Accuracy
| Resolution, full step (arcsec) | 10.62 |
|---|---|
| Resolution, 8× microstep (arcsec) | ≈1.32 |
| Max speed (°/s) | ≈5.9 |
Motor & electrical
| Motor and step angle (°) | Two-phase 57 stepping motor, 1.8 |
|---|---|
| Motor model | 57BYG250CIl |
| Motor current (A) | 2.4 |
| Motor torque (N·m) | 1.72 |
| Stepper driver (optional) | Moons, SR4 |
Sensors & connection
| Connector | DB9 (pin) |
|---|---|
| Limit sensors (built-in) | 2×KX-SS-5GL2 |
| Sensor supply voltage | DC5~24V±10% |
| Sensor current consumption (mA) | <60 (total) |
| Sensor output | Position-limit sensors (built-in): dry-contact output |
| Sensor output logic | Position-limit sensors (built-in): output ON when sensor is triggered |
Load capacity
| Horizontal load capacity (kg) | 30 |
|---|
Compatible controllers
For the two-phase 57 stepping motor this stage uses.