Zolix · Motorized Stages
CZF40-200 Motorized Vertical Stage
Motorized vertical stage with 40 mm travel and a 200×200 mm table. Transmission: worm gear and worm; guide: linear-slider guides. Repositioning accuracy ≤±2 µm; max speed 0.833 mm/s. Horizontal load capacity 30 kg; weight 12.5 kg.
- Travel range
- 40 mm
- Repositioning accuracy
- ≤±2 µm
- Horizontal load capacity
- 30 kg
- Table size
- 200×200 mm
Specifications
Mechanical
| Travel range (mm) | 40 |
|---|---|
| Table size (mm) | 200×200 |
| Ball screw | φ16, 10mm lead |
| Transmission mechanism | Worm gear and worm |
| Transmission ratio | 120:1 |
| Worm gear material | Wear-resistant tin bronze |
| Worm material and treatment | Steel, high frequency quenchinged |
| Guide mechanism | Linear-slider guides |
| Body material and finish | Black anodized aluminum alloy |
| Shaft coupling, OD-bore-bore (mm) | 30-6.35-6.35 |
| Weight (kg) | 12.5 |
Accuracy
| Resolution, full/half step (µm) | ≈0.42/0.21 |
|---|---|
| Resolution, 8× microstep (µm) | ≈0.052 |
| Max speed (mm/s) | 0.833 |
| Backlash, no load (µm) | ≤15 |
| Repositioning accuracy (µm) | ≤±2 |
| Static parallelism (mm) | ≤0.12 |
Motor & electrical
| Travel per motor revolution (mm) | ≈0.083 |
|---|---|
| Motor and step angle (°) | Two-phase 57 stepping motor, 1.8 |
| Motor model | Shinano, SST59D3206 |
| Motor current (A) | 2.8 |
| Motor torque (N·m) | 1.44 |
| Stepper driver (optional) | Moons, SR4 |
Sensors & connection
| Connector | DB9 (pin) |
|---|---|
| Cable type | High flexibility cable (Helukabel, Germany) |
| Cable length (m) | 0.2 |
| Limit sensors (built-in) | 2×GP1S09xHCPI (SHARP, Japan) |
| Origin sensor (built-in) | 1×GP1S09xHCPI (SHARP, Japan) |
| Sensor supply voltage | DC5~24V±10% |
| Sensor current consumption (mA) | <60 (total) |
| Sensor output | NPN open-collector output DC5~24V 8mA or less Residual voltage 0.3V or less (when load current is 2mA) |
| Sensor output logic | Output ON when sensor is blocked |
Load capacity
| Horizontal load capacity (kg) | 30 |
|---|
Compatible controllers
For the two-phase 57 stepping motor this stage uses.