Power stability, linewidth, beam quality
MSL-FN-335335 nm UV CW laser
335 nmMSL-FN-335 is a 335 nm CW laser. Used for dna sequencing, flow cytometry, cell sorting, optical instrument. Laser. Key specifications: output / average power 1~10 mW, operating mode CW, transverse mode TEM00. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MSL-FN-335
24 specification rows
| Wavelength | 335 nm |
|---|---|
| Output / average power | 1~10 mW |
| Beam / notes | Laser |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Longitudinal mode | Single |
| Spectral line width (nm) | <1MHz |
| Noise of amplitude (rms, 20Hz-20MHz) | <1%, <0.5% |
| M2 | <1.5 |
| Beam diameter at the aperture (1/e2, mm) | <1.0 |
| Beam divergence, full angle (mrad) | <1.2 |
| Polarization ratio | >100:1, Vertical (Horizontal optional) |
| Pointing stability Over Temperature(urad/℃) | <8 |
| Frequency shift (MHz)(Over±2℃and 8hrs) (optional) | <±200 |
| Operating Temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA |
| Expected lifetime (hours) | >10000 |
| Coherent length (m) | >50 |
| M² | <1.5 |
| Pointing stability (urad) (over 2 hours after warm-up and±3℃) | <50 |
| Frequency shift with Temp (MHz/°C) (optional) | <200 |
| Beam height from base plate (mm) | 27.4 |
| Warm-up time (minutes) | <10 |
| Laser head consumption(W) | 15 (typical), <25 (40℃) |
| Max. Laser Head Base plate Temp (°C) | 50 |
Applications
Uses named on this model’s datasheet.
- DNA sequencing
- Flow cytometry
- Cell sorting
- Optical instrument
- Spectrum analysis
- Interference
- Measurement
- Holography
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related cw lasers
Compare the MSL-FN-335 with nearby cw lasers across the wavelength range.
