Fiber output, PM options, seed formats
MLL-H-10401040 nm near-infrared fiber laser
1040 nmMLL-H-1040 is a 1040 nm Fiber laser. Used for scientific experiments, optical instruments, sensors, measurement. Fiber laser Low Noise Infrared Laser. Key specifications: output / average power 1~100 mW, operating mode CW, spectral line width (nm) <0.1. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MLL-H-1040
18 specification rows
| Output / average power | 1~100 mW |
|---|---|
| Beam / notes | Fiber laser Low Noise Infrared Laser |
| Operating mode | CW |
| Spectral line width (nm) | <0.1 |
| Transverse mode | TEM00 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1% |
| M2 | <1.5 |
| Beam divergence (mrad) | <2.0 |
| Warm-up time (minutes) | <5 |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1040±1 |
| Output power (mW) | 1-100 |
| M² | <1.5 |
| Beam diameter at the aperture (1/e2, mm) | ~1.5 |
| Pointing stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 29 |
Applications
Uses named on this model’s datasheet.
- Scientific experiments
- Optical instruments
- Sensors
- Measurement
- Communication
- Spectral analysis
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the MLL-H-1040 with nearby fiber lasers across the wavelength range.
