Power stability, linewidth, beam quality
MGL-III-532-AOM532 nm green CW laser
532 nmMGL-III-532-AOM is a 532 nm CW laser. Used for laser lithography, laser phototypesetting, laser digital communication. M² factor: <1.2; M²: <1.2; Operating mode: High modulation up to 1 MHz. Key specifications: output / average power 1~150 mW, power stability <1%, m² <1.2. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MGL-III-532-AOM
19 specification rows
| Output / average power | 1~150 mW |
|---|---|
| Power stability | <1% |
| M² | <1.2 |
| Beam / notes | M² factor: <1.2; Operating mode: High modulation up to 1 MHz |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1.5 |
| Polarization ratio | >100:1, Vertical (Horizontal Optional) |
| Warm-up Time (minutes) | <5 |
| Operating temperature(℃) | 10-35 |
| Power supply (90-264VAC) | PSU-H-FDA-AOM/PSU-H-LED-AOM |
| Modulation optional | DC-1MHz；TT or Analog optional |
| Expected lifetime (hours) | ＞10000 |
| Wavelength (nm) | 532±1 |
| Output power (mW) | 1-150 |
| Beam Diameter at the aperture at the aperture 1/e2 (mm) | <1.5 |
| Pointing stability (urad)(over 2 hours after warm-up and±3℃) | <50 |
| Pointing stability Over Temperature(urad/℃) | <8 |
| Beam height from base plate (mm) | 24.8 |
Applications
Uses named on this model’s datasheet.
- Laser lithography
- Laser phototypesetting
- Laser digital communication
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related cw lasers
Compare the MGL-III-532-AOM with nearby cw lasers across the wavelength range.
