Fiber output, PM options, seed formats
FL-1100-LN-L1100 nm infrared single-frequency low-noise fiber laser
1100 nmFL-1100-LN-L is a 1100 nm Fiber laser. Used for wafer inspection, optical trap, holographic imaging, pumping source. Fiber laser Low Noise Infrared Laser. Key specifications: output / average power 1~5 W, operating mode CW, power stability (rms, 4 hours, ±3℃) <2%, <1%, <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-1100-LN-L
23 specification rows
| Output / average power | 1~5 W |
|---|---|
| Beam / notes | Fiber laser Low Noise Infrared Laser |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3℃) | <2%, <1%, <0.5% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Spectral linewidth (nm) | <0.004 |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.1%, <0.05% |
| Frequency shift (MHz) (over ±2℃and 8 hours) | <±200 |
| M2 | <1.1 |
| Fiber connector | FC/APC, Collimator optional |
| Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Polarization ratio (dB) | >15, after PM fiber |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Operating temperature (℃) | 15-30 |
| Power supply (VAC) | 110/220VAC |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1100±1 |
| Current adjustment range | 1-100% |
| M² | <1.1 |
Applications
Uses named on this model’s datasheet.
- Wafer inspection
- Optical trap
- Holographic imaging
- Pumping source
- Scientific research
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-1100-LN-L with nearby fiber lasers across the wavelength range.
