Fiber output, PM options, seed formats
FL-SC-OEM (500~1000 mW) is a 470~2400 nm Fiber laser. Supercontinuum (white-light) source, 470~2400 nm broadband output, M² <1.1, air cooled. Key specifications: operating mode Pulsed, output / average power 500~1000 mW, pulse width 1.5 ns. View specifications, datasheet and enquiry options from Precisometer.
Specifications
15 specification rows
| Wavelength | 470~2400 nm |
|---|---|
| Operating mode | Pulsed |
| Output / average power | 500~1000 mW |
| Pulse width | 1.5 ns |
| Repetition rate | 1 MHz |
| Power stability | <2%, <1% |
| M² | <1.1 |
| Beam / notes | Supercontinuum white-light source, air cooled |
| Fiber connector | FC/APC |
| Fiber jacket | PVC |
| Polarization ratio | Random |
| Warm-up time (minutes) | <15 |
| Cooled method | Air cooled |
| Operating temperature (℃) | 15-35 |
| Operating voltage (VDC) | 12V/11.5A |
| Expected lifetime (hours) | >10000 |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
FL-SC-OEM (500~1000 mW): 470~2400 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. The catalogued beam parameter (<1.1) helps predict how the source will focus and propagate through the instrument.
FL-SC-OEM (500~1000 mW): Laboratory measurement benefits from a stable, focusable source. 470~2400 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (<1.1) informs waist size and propagation.
System integration
Use these checks to connect FL-SC-OEM (500~1000 mW) to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber connector: FC/APC. Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
Cooled method: Air cooled · Operating temperature (℃): 15-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
M²: <1.1 · Polarization ratio: Random. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare FL-SC-OEM (500~1000 mW) with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
Compare the FL-SC-OEM (500~1000 mW) with nearby fiber lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide