Back to Home

Fiber output, PM options, seed formats

FL-1540-SLM1540 nm infrared narrow-linewidth single-frequency fiber laser

1540 nm

The FL-1540-SLM is a 1540 nm continuous-wave fiber laser. A seed laser establishes the optical signal, and a fiber amplifier increases its power while guiding the light in active fiber. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.

Specifications

FL-1540-SLM

24 specification rows

Output / average power1~10 W
Spectral linewidth<5 kHz
M²<1.1
Typical wavelength (nm)1540, 1550, 1560
Operating modeCW
Power stability (rms, 4 hours ±3℃)<2%, <1%, <0.5%
Transverse modeTEM00
Longitudinal modeSLM
Current adjustment range1-100%
Temperature turning range (nm)>0.4
PZT Tuning range (GHz)>3
PZT Tuning bandwidth (kHz)>5
Relative intensity noise (rms, 10Hz-3MHz)<0.3%, <0.1%, (<0.05% optional)
Frequency shift (MHz) (over ±2℃and 8 hours)<±200
Fiber connectorFC/APC, Collimator optional
Fiber length(m)1
Fiber jacketPVC, Metal optional
Beam diameter (mm)4±1 (Collimator output)
Polarization ratio (dB)>15, after PM fiber
Warm-up time (minutes)<30
Cooled methodAir cooled or Water cooled
Operating temperature (℃)15-30
Power supply (VAC)110/220VAC
Expected lifetime (hours)>10000

What do you need?

Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.

Model selection

Nearby series comparison

Compare FL-1540-SLM with the closest available models in the Fiber Lasers family.

Selection parameterFL-1540-SLM (current)MLL-III-1540-SMTEM-F-1540DFB
Wavelength1540 nm1540 nm1540 nm
Optical power / pulse energy1~10 W1~15 mW1~20 mW
Operating mode / pulse widthCW——
Beam quality<1.1——