Power, wavelength, beam profile, safety
PD10-800-TP100 Laser Power Meter
- Display unit: TP100
- Sensor model: PD10-800
- Power Range: 1 μW - 10 mW
- Active Area Diameter: 9.5 mm
- Wavelength Range: 800-1800 nm
- Max. Power Density: 1 W/cm²

Model Specifications
PD10-800-TP100 Laser Power Meter
Model specifications
| Parameter | Specification |
|---|---|
| Display unit | TP100 |
| Sensor model | PD10-800 |
| Power Range | 1 μW - 10 mW |
| Active Area Diameter | 9.5 mm |
| Wavelength Range | 800-1800 nm |
| Max. Power Density | 1 W/cm² |
| Measurement Uncertainty | ±2% |
| Resolution | 1 μW |
| Sensitivity | 1 μW |
| Accuracy | <±2% |
| Power Supply | 18650 (2 batteries) |
| Computer Interface | USB 1.1 and USB 2.0 |
| Instrument Power | 100-240 V AC, 50/60 Hz, DC 12 V, 3.34 A |
| Temperature (Operating) | 5°C - 45°C (41°F - 113°F) |
| Temperature (Storage) | -20°C - 70°C (-4°F - 158°F) |
| Warranty Period | 1 year |
| Fibre connector | SMA905 / FC optional |
Measurement conditions
| Condition | Detail |
|---|---|
| Note 1 | Keep total optical power and average power density within the stated limits. Check the beam spot size before measurement. |
| Note 2 | Sensor damage caused by exceeding the listed measurement limits is excluded from the stated warranty. Confirm the supplied warranty terms with the quotation. |
Construction details
- Detector assembly: PD10-800.
Sensor, display and mechanical views


Need this configured?
Share measurement range, detector needs, interface requirements, mounting constraints and calibration needs, and we will qualify the matching configuration.