Technology guide
Solar-cell photoluminescence: optical excitation and collection
Choose excitation and detection bands separately for contactless luminescence inspection of photovoltaic material.
- 01Optical excitation
- 02Carrier generation
- 03Cell emission
- 04PL image
How it works
- Photoluminescence inspection optically excites a photovoltaic sample and records its emitted light. Electrical contacts are not inherently required for the excitation step.
- The excitation distribution and collection path affect image contrast. Illumination nonuniformity can be mistaken for sample variation if it is not controlled.
- Excitation and emission occupy different roles in the optical chain. Filters and detector response must discriminate the wanted signal from scattered pump light.
- PL and EL provide different excitation conditions. Results must be interpreted with the sample state and measurement geometry retained.
What to compare
| Parameter | Check in the specification |
|---|---|
| Excitation | Keep spectrum, intensity, uniformity and illumination area together. |
| Detection | Match the emission band, filters and camera response. |
| Sample handling | Check wafer, cell or module dimensions and support requirements. |
| Comparison method | Use consistent exposure, background and reference procedures. |
Integration
- Confirm which illumination, filtering and camera modules are included.
- Separate optical-excitation options from the electrical drive used for EL.
- Use reference measurements before assigning material or device differences to spatial brightness patterns.
Related products
References
Discuss the configuration. Send the device format, measurement method, field of view and acquisition conditions.