Technology guide
Fiber Bragg gratings: reflection bands and sensitivity
Use a written index grating for wavelength selection while accounting for strain, temperature and packaging.
- 01Guided light
- 02Periodic index
- 03Bragg reflection
- 04Transmitted light
How it works
- A fiber Bragg grating is a periodic refractive-index structure in an optical fiber. It couples a selected band into a reflected wave while other wavelengths can continue along the fiber.
- The Bragg wavelength depends on effective index and grating period. Strain and temperature can therefore shift the reflection band.
- Reflectors, filters, laser-stabilisation elements and sensors use this behaviour differently. A grating in a laser diode assembly does not make the diode a fiber laser.
- Package design controls how environmental changes reach the grating. A bare-fiber property does not establish the stability of a finished device.
What to compare
| Parameter | Check in the specification |
|---|---|
| Spectral band | Keep centre wavelength, reflection bandwidth and side-lobe behaviour together. |
| Reflectivity | Check the specified reference plane and usable pass or reflection port. |
| Environmental response | Use the packaged device's thermal and strain coefficients. |
| Fiber interface | Match fiber type, polarization requirements and connectors. |
Integration
- Plan a circulator or other routing arrangement when the reflected signal must be separated from the input.
- Avoid uncontrolled strain from mounting and cable routing.
- For wavelength-stabilised sources, use the complete module specification rather than applying a standalone grating curve.
Related products
References
Discuss the configuration. Send the wavelength, optical levels, port topology and fiber interfaces.