Technology guide
Electro-optic modulators: phase, intensity and bias
Identify the electro-optic interaction and the optical arrangement that turns electrical drive into the required output.
- 01Electrical field
- 02Index change
- 03Phase control
- 04Optical output
How it works
- An electro-optic material changes refractive index in response to an applied electric field. This provides a means of controlling optical phase.
- Intensity modulation requires a suitable optical arrangement, such as interference or polarization analysis. A phase modulator alone does not imply direct intensity control.
- Waveguide, bulk and resonant implementations have different interfaces and operating limits. A lithium-niobate label does not establish a particular electrode or interferometer layout.
- Bias and polarization can affect the transfer function. The RF path and low-frequency bias interface may require separate control.
What to compare
| Parameter | Check in the specification |
|---|---|
| Optical interface | Check wavelength, polarization, insertion loss and fiber or free-space coupling. |
| Drive efficiency | Keep half-wave voltage with its definition, frequency and electrode configuration. |
| Bandwidth | Read the electrical-optical response and termination requirements. |
| Bias control | Confirm whether a bias circuit or stabilisation loop is included. |
Integration
- Match the driver voltage and RF impedance to the exact device.
- For intensity modulation, define the required operating point and extinction behaviour.
- Keep phase modulation, intensity modulation and optical switching requirements separate when specifying a system.
Related products
References
Discuss the configuration. Send the wavelength, optical levels, port topology and fiber interfaces.