Technology guide
Aspheric lenses: surface shape and aberration control
Use an aspheric surface where its design wavelength, aperture and conjugates match the required focusing or collimation.
- 01Incident wavefront
- 02Aspheric surface
- 03Refraction
- 04Corrected wavefront
How it works
- An aspheric surface departs from a spherical profile. Its extra design freedom can reduce aberrations for a specified optical task.
- A lens optimised for collimating a source is not automatically a general imaging lens. Conjugate distances and beam geometry matter.
- Aspheric shape does not establish glass material, coating or manufacturing method. Moulding, polishing and other fabrication routes must not be inferred from a catalogue label.
- Clear aperture and numerical aperture constrain the accepted beam. A larger barrel does not imply a larger useful optical aperture.
What to compare
| Parameter | Check in the specification |
|---|---|
| Optical task | Match focusing, collimation or imaging to the stated design conditions. |
| Wavelength | Use the design wavelength and coating band. |
| Geometry | Keep focal length, back focal length and working distances distinct. |
| Beam quality | Compare aberration or spot specifications under the stated input conditions. |
Integration
- For fiber coupling, check the fiber numerical aperture and the required mode matching.
- Use the prescribed lens orientation and mounting constraints.
- Confirm whether a holder is supplied; a mount for an aspheric lens does not establish that the lens itself is included.
Related products
References
Discuss the configuration. Send the wavelength, beam or image geometry and mechanical interfaces.