Photovoltaic inspection
Electroluminescence module inspection integrated into photovoltaic production workflows.
Representative manufacturer photograph; housing and connectors depend on the selected configuration. Select the photograph to enlarge.
From photon to signal
A single QE curve is not specified for this complete PV-inspection system. Camera response depends on the installed detector and the emission spectrum of the cell or module. EL/PL detector QE must also be distinguished from an EQE measurement of the photovoltaic device itself.
The details behind the selection
Compare sensor configurations, coating options, operating limits and integration details directly below. Check the operating mode and temperature alongside each performance value.
| Parameter | Published specification |
|---|---|
| Substrates | Pre-laminates |
| Parameter | Published specification |
|---|---|
| Substrates | Solar modules |
| Parameter | Published specification |
|---|---|
| Cell type | mono- and poly-crystalline silicon, thin-film, HIT, IBC |
| Complete cycle time | 26 sec (including feed-in and feed-out) |
| Max. size | 2.0 x 1.0 m |
| Nominal throughput | 138 modules/hour |
| Inspections | Sunny side down |
| Imaging Subsystem | Two scientific 16-bit large format greateyes cameras, resolution 500 μm |
| Dimensions (W x D x H) | 2200 mm x 2200 mm x 1400 mm - for pre-laminate inspection with long side forward |
| Certification | CE |
| Parameter | Published specification |
|---|---|
| Measurement | Electroluminescence |
| Configuration | Application-specific system; discuss sample size and measurement workflow |
Build your enquiry
Capture the system requirements and integration details you want to discuss with Precisometer.
Technical overview
Electroluminescence module inspection integrated into photovoltaic production workflows.
| Measurement | Electroluminescence |
|---|---|
| Configuration | Application-specific system; discuss sample size and measurement workflow |
Explore the wider range
6 product ranges · 0 camera configurations
Representative equipment; the complete configuration depends on your application.
Module inspection in the laboratory, with an enclosed electroluminescence measurement setup.
Representative equipment; the complete configuration depends on your application.
A portable electroluminescence camera system for flexible solar-cell and module inspection.
Representative equipment; the complete configuration depends on your application.
Battery-powered electroluminescence inspection of installed solar modules after twilight or at night.
Representative equipment; the complete configuration depends on your application.
Electroluminescence characterisation of photovoltaic cells, including reverse-biased EL.
Representative equipment; the complete configuration depends on your application.
Contactless photoluminescence characterisation of solar cells and wafers using LED excitation.
Representative equipment; the complete configuration depends on your application.
Combined electroluminescence and photoluminescence in a compact photovoltaic characterisation system.