Set-and-forget alignment
Adjust once during setup and lock, on axes that do not need to move again during the run.
Opto-Mechanics · NFP-x561 series High Precision Fiber Alignment Stages
NFP-2561T
NFP-2561T high-precision two-axis tilt stage
SUS304 two-axis tilt module for adding pitch and yaw adjustment to an NFP-3561 linear fiber-alignment stage.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where NFP-2561T fits
NFP-2561T is listed as NFP-2561T high-precision two-axis tilt stage in the NFP-x561 series High Precision Fiber Alignment Stages family. The local catalog record provides these first selection fields: Travel range θy(°): -2~4; Travel range θz(°): -4~4; Guide mechanism: rotational structure.
Specifications
| Travel range θy(°) | -2~4 |
|---|---|
| Travel range θz(°) | -4~4 |
| Guide mechanism | rotational structure |
| Drive type | Screw |
| Main body material and | Stainless steel, sandblasting |
| Weight(Kg) | 1.2 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Coarse positioning ahead of fine stages
Establish the optical axis by hand before a piezo or motorised stage takes the fine motion.
Prototyping and teaching rigs
Reconfigure a layout quickly, with no cabling, controllers or electrical noise added to the experiment.
System integration
Integration and compatibility
Use these checks to connect NFP-2561T to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Adjustment
- Travel range θy(°): -2~4 · Travel range θz(°): -4~4
- Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
- Material and finish
- Main body material and: Stainless steel, sandblasting
- Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
- Dimensions and mass
- Weight(Kg): 1.2
- Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Technical FAQ
Integration questions for NFP-2561T
What adjustment range does the NFP-2561T offer?
Travel range θy(°): -2~4 · Travel range θz(°): -4~4. Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
What is the NFP-2561T made from?
Main body material and: Stainless steel, sandblasting. Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
What are the dimensions of the NFP-2561T?
Weight(Kg): 1.2. Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Model selection
Nearby series comparison
Compare NFP-2561T with the closest available models in the NFP-x561 series High Precision Fiber Alignment Stages family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | NFP-2561T (current) | NFP-2561TL | NFP-3561 |
|---|---|---|---|
| Optic accepted | Confirm for this model | Confirm for this model | Confirm for this model |
| Adjustment | -2~4 | -2~4 | 13 |
| Mounting interface | Confirm for this model | Confirm for this model | Confirm for this model |
| Material | Stainless steel, sandblasting | Stainless steel, sandblasting | Stainless steel, sandblasting |
