Optical Shutters
The optical power regulator, based on a high-performance variable fiber optical attenuator and high-precision control circuits, provides tunable optical output power and maintains it to counter the power fluctuations caused by PDL and other sources. The optical power regulator is designed to meet the most demanding operation requirements of ultra-high reliability and fast response to provide the ultimate solution for optical power stabilizing and limiting. Our also offers customized and embeddable electronic designs to meet special control applications.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Input Power: < 0.5W · Wavelength: 1060 · Output power: 0.001W · Dynamic: 18dB · Fiber Type: SMF-28 · Fiber Length: 0.25m · Connector: FC/PC
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
High Speed Fiber Optical Sensor Protector: Laboratory optical integration depends on preserving the optical budget through the complete path. The 1060, 2000, 1310, 1480, 1550, 1625 wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, HI1060, HI780, PM1550, PM850, PM980) must match the connected components.
High Speed Fiber Optical Sensor Protector: Fiber-optic instrumentation depends on preserving the optical budget through the complete path. The 1060, 2000, 1310, 1480, 1550, 1625 wavelength specification sets source and detector compatibility. The fiber/interface entry (SMF-28, HI1060, HI780, PM1550, PM850, PM980) must match the connected components.
Downloads
System integration
Use these checks to connect High Speed Fiber Optical Sensor Protector to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: SMF-28, HI1060, HI780, PM1550, PM850, PM980 · Fiber Length: 0.25m, 0.5m, 1.0m. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1060, 2000, 1310, 1480, 1550, 1625. Check the Optical Shutters passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare High Speed Fiber Optical Sensor Protector with the closest available models in the Optical Shutters family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | High Speed Fiber Optical Sensor Protector (current) | MEMS 0.26mm Movement Free Space Attenuator/Shutter Chip | MEMS 0.26mm Movement Free Space Attenuator/Shutter With Mount |
|---|---|---|---|
| Wavelength range | 1060, 2000, 1310, 1480, 1550, 1625 | Confirm for this model | Confirm for this model |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | SMF-28, HI1060, HI780, PM1550, PM850, PM980 | Confirm for this model | Confirm for this model |
| Connector / control | FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC | Confirm for this model | Confirm for this model |
Optical Power Regulators/Surge Protectors
MEMS 0.5mm Movement Free Space Attenuator/Shutter With MountMEMS 0.3mm Movement Free Space Attenuator/Shutter With MountMEMS 0.5mm Movement Free Space Attenuator/Shutter ChipMEMS 0.3mm Movement Free Space Attenuator/Shutter ChipMEMS 0.26mm Movement Free Space Attenuator/Shutter Chip