High Power Fiber Optical Components
High Power Fiber Collimator Long Distance to 100m
Our 1kW (CW) Fiber Collimators incorporates advanced technologies of direct fusion to a large beam expanding end cap ensuring safe power density, and a mode stripper that prevents burning the buffer/jacket by removing unwanted back-reflection radiation. These technologies significantly increase the collimator reliability. We can provide customized beam size for a wide choice of operating wavelength and fiber types.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Wavelength (nm): 1060 · Power Handling: 10W · Beam Size or Divergence: 5.0mm · Working Distance: 0.1m · Fiber Type: SMF28 · Fiber Cover: 900um tube · Fiber Length: 0.25m · Connector: None
System integration
Integration and compatibility
Use these checks to connect High Power Fiber Collimator Long Distance to 100m to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Fiber Type: SMF28, PM1550, SM1950, PM1950, Hi1060, PM980, Hi780, PM850, 105/125μm · Fiber Cover: 900um tube, 3mm PVC cable, 3mm Armor cable, 5mm Armor cable
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength (nm): 1060, 2000, 1310, 1480, 1550, 1625, 780, 850, 980, 850/1310, 1260~1620, 1310/1550, 350, 530
- Check the High Power Fiber Optical Components passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for High Power Fiber Collimator Long Distance to 100m
Which fiber and connector does the High Power Fiber Collimator Long Distance to 100m use?
Fiber Type: SMF28, PM1550, SM1950, PM1950, Hi1060, PM980, Hi780, PM850, 105/125μm · Fiber Cover: 900um tube, 3mm PVC cable, 3mm Armor cable, 5mm Armor cable. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the High Power Fiber Collimator Long Distance to 100m be included in an optical power budget?
Wavelength (nm): 1060, 2000, 1310, 1480, 1550, 1625, 780, 850, 980, 850/1310, 1260~1620, 1310/1550, 350, 530. Check the High Power Fiber Optical Components passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare High Power Fiber Collimator Long Distance to 100m with the closest available models in the High Power Fiber Optical Components family.
| Selection parameter | High Power Fiber Collimator Long Distance to 100m (current) | Optical Fiber End Cap |
|---|---|---|
| Wavelength range | 1060, 2000, 1310, 1480, 1550, 1625, 780, 850, 980, 850/1310, 1260~1620, 1310/1550, 350, 530 | 1060, 2000, 1310, 1480, 1550, 1625, 780, 850, 980, 460, 530, 630, 360, Special |
| Fiber type | SMF28, PM1550, SM1950, PM1950, Hi1060, PM980, Hi780, PM850, 105/125μm | SMF-28, SMF-28e, Corning XB, SM450, SM1950, SM600, Hi780, SM800, Hi980, Hi1060, SM300, SM400, PM1550, PM1950, PM1310, PM405, PM480, PM630, PM850, PM980, PM780, PM350, PM460, GIF 50/125um, GIF 62.5, 105/125um, FG105LCA, FG50LGA, STP 50/125 |
| Connector / control | None, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC/PC, SMA905, LC/UPC, Special | None, FC/PC, FC/APC, SC/PC, SC/APC, ST/PC, LC/PC, Special |
