No product photo published
Fiber Implants and Mating Sleeves
Mightex does not publish a photograph for this item. Drawings, where available, are listed under documents.
Mightex · Photometry and optogenetics accessories
Implantable fiber-optic cannulae with 1.25 mm or 2.5 mm ceramic ferrules (200 or 400 µm core, 0.37 or 0.50 NA, 5 or 10 mm protrusion), mating sleeves and reinforcing sleeve clamps.
Manufactured by Mightex. Precisometer is a Mightex distribution partner: we quote, integrate and support Mightex products, with in-person support in the Netherlands and Belgium.
Values this page lists that its neighbours in “Photometry and optogenetics accessories” do not.
Configurations
| Part number | Listed in the shop as | Mightex description | Add to enquiry |
|---|---|---|---|
| CLAMP-SLV125 | ACC-FPC-SLV125 | Reinforcing clamp for mating sleeves of 1.25mm ferrule and cannula. Increases disconnecting force and reduces light leakage. | |
| CLAMP-SLV250 | ACC-FPC-SLV250 | Reinforcing clamp for mating sleeves of 2.50mm ferrule and cannula. Increases disconnecting force and reduces light leakage. | |
| CNL-400-50-10-250C | CNL-0400-50-10-250C | Implantable fiber optic cannula, 2.5mm ceramic ferrule with 0.50NA, 400um core fiber, protrusion length 10mm | |
| CNL-400-50-10-125C | CNL-0400-50-10-125C | Implantable fiber optic cannula, 1.25mm ceramic ferrule with 0.50NA, 400um core fiber, protrusion length 10mm | |
| CNL-400-50-05-250C | CNL-0400-50-05-250C | Implantable fiber optic cannula, 2.5mm ceramic ferrule with 0.50NA, 400um core fiber, protrusion length 5mm | |
| CNL-400-50-05-125C | CNL-0400-50-05-125C | Implantable fiber optic cannula, 1.25mm ceramic ferrule with 0.50NA, 400um core fiber, protrusion length 5mm | |
| CNL-200-50-10-250C | CNL-0200-50-10-250C | Implantable fiber optic cannula, 2.5mm ceramic ferrule with 0.50NA, 200um core fiber, protrusion length 10mm | |
| CNL-200-50-10-125C | CNL-0200-50-10-125C | Implantable fiber optic cannula, 1.25mm ceramic ferrule with 0.50NA, 200um core fiber, protrusion length 10mm | |
| CNL-200-50-05-250C | CNL-0200-50-05-250C | Implantable fiber optic cannula, 2.5mm ceramic ferrule with 0.50NA, 200um core fiber, protrusion length 5mm | |
| CNL-200-50-05-125C | CNL-0200-50-05-125C | Implantable fiber optic cannula, 1.25mm ceramic ferrule with 0.50NA, 200um core fiber, protrusion length 5mm | |
| ACC-FPC-SLV250 | — | Mating sleeve for 2.5mm ferrule or cannula | |
| ACC-FPC-SLV125 | — | Mating sleeve for 1.25mm ferrule or cannula | |
| CNL-0200-37-05-250C | — | Implantable fiber optic cannula, 2.5mm ceramic ferrule with 0.37NA, 200um core fiber, protrusion length 5mm | |
| CNL-0200-37-05-125C | — | Implantable fiber optic cannula, 1.25mm ceramic ferrule with 0.37NA, 200um core fiber, protrusion length 5mm | |
| CNL-0200-37-10-250C | — | Implantable fiber optic cannula, 2.5mm ceramic ferrule with 0.37NA, 200um core fiber, protrusion length 10mm | |
| CNL-0200-37-10-125C | — | Implantable fiber optic cannula, 1.25mm ceramic ferrule with 0.37NA, 200um core fiber, protrusion length 10mm |
Downloads
No downloadable document is published for this item.
We can send the technical information Mightex provides for it.
Request technical informationPhotometry and optogenetics accessories
Photometry and optogenetics accessories
Patch cords from SMA to 1.25 mm or 2.5 mm ceramic ferrules (200 or 400 µm core, 0.22 to 0.50 NA) and versions with a fiber-optic rotary joint for freely moving animals, including a branched rotary bundle and cords for Type-H FCS sources.
Photometry and optogenetics accessories
Low-autofluorescence multimode fibers and furcated bundles for fiber photometry with standard OASIS units: 0.39 NA, 200 to 600 µm cores, single or 2-, 4-, 7- or 19-branch, SMA to SMA or to 1.25 mm or 2.5 mm ferrules.
Product familyPhotometry and optogenetics accessories
Ready-made 470 nm ChR2 stimulation kits built around a BLS fiber-coupled LED, with a software/TTL or manual/analog LED controller, a patch cord or rotary joint, mating sleeves and implantable cannulae.