Match the pulse train to the detector timing and excitation band. The visible output uses a separate frequency-conversion head; cable separation and the thermal interface form part of the installation.
Configuration options
| Centre wavelength | Pulse duration | Repetition rate | Average power | Spectral width |
|---|---|---|---|---|
| 514-595 nm | 15-100 ps | 10-100 MHz | Up to 300 mW | Not numerically specified |
Technical details
- Output delivery
- Free space
- Beam propagation factor
- M² <1.1, typical
- Polarization extinction ratio
- >20 dB, typical
Integration and delivery
- Laboratory unit
- 287 x 196 x 71 mm; 12 V supply and thermal plate customer supplied; air cooling option
- Rack unit
- 248 x 436 x 83 mm; built-in supply; air cooled
- Conversion head
- 132 x 50 x 30 mm; 2 m separation between units
Conditions and configuration notes
- The repetition rate and pulse duration are fixed choices within the stated intervals; those intervals are not a claim of user adjustment on every unit.
- Average power depends on wavelength, repetition rate and pulse settings. Maxima from different options must not be combined into one operating point.
Applications to discuss
- Fluorescence-lifetime measurements
- Time-resolved spectroscopy
Specify your configuration
Precisometer supports selection and integration. Contact us for a quotation against an agreed configuration.
- Centre wavelength, pulse duration and repetition rate
- Average power and pulse requirements at the sample
- Delivery optics, dispersion and electrical or thermal interfaces
Local technical draft · configuration and final specifications require confirmation.